Information Technology Equipment and other electronic devices must comply with various international radiated emissions and susceptibility requirements. Under specific conditions, FCC part 15 (US) requires such equipment to pass stringent regulations up to 40 GHz. Most unintentionally-radiated emissions are from field leakage at various chassis external interfaces, or from unbalanced differential signals; containment of both require shielding materials to provide a low impedance path despite the broadband and/or high-frequency operation of such devices.
Simultaneously, these electronic devices are sensitive to various susceptibility requirements, including electrostatic discharge (ESD, e.g., IEC 61000-4-2), and, in some cases, must resist to applied voltages as high as 15 kV. In this instance, the same shielding materials must also feature a very low impedance/resistance at very low frequencies to ensure a harmless discharge path exists to allow the charge to flow from the I/O connectors to the exterior of the chassis, and then safely away from the devices.
Schlegel Electronic Materials (SEM) introduces ORS-II, a new series of gaskets specially designed for broadband applications. By combining its famous nickel copper plated conductive foam and its high-end nickel copper C12 flexible fabric cladding, ORS-II offers minimal surface resistance to achieve superior grounding and shielding results at low frequencies. By offering excellent Z-conductivity to close the cavities in the chassis openings, ORS-II also ensures substantial shielding performance at high frequencies. ORS-II is available in a variety of thicknesses, which are die-cut to customer specifications, for a durable highly conductive product in all X-Y-Z axes. In addition, shielding efficiency is achieved with less sensitivity to compression variances than other traditional shielding products. ORS-II is available with a UL94-V0 flammability rating and complies with RoHS 2.0 European Directive and SVHC Policy (REACH).
All these features combined in one product makes ORS-II a great engineering solution when addressing all types of shielding challenges which are present in broadband and high-speed applications.
ORS-II is available in a multitude of geometries and in varying thicknesses. ORS-II is recommended for all combinations of I/O connectors, is particularly effective when broadband emissions and/or susceptibility are of concern, and is far more effective than standard conductive foam when superior grounding is important.
Stripline method (IEEE std 1302)
-40°F +156°F (-40°C +70°C)
<=0.024 Ohm/sq. : NiCu-C12
SEM LP 3004
<15% (compressed at 50% during 22 Hrs. @ 70 ?)
<0.08 Ohm-inch: NiCu-C12
SEM LP 3001
ORS-II Part Number Guideline:
CC3EXXXX – ORS II
CC3E: Die-cut according to customer drawing
XXXX: Sequence number
Shielding effectiveness of ORS-II versus current shielding materials
Available 09:00 - 18:00
No.8 Qiaoxin Road, Qiaotou Dongguan, Guangdong, P.R. China
Postal Code: 523525
Tel: +86-769-8334 8480
Fax: +86-769-8334 2028
Unit 2 3/F., Block A, New Trade Plaza, 6 On Ping Street, Shatin, N.T., HK
Tel: +852-2637 8822
Fax: +852-2686 8128
No.8B Qiaoxin Road, Qiaotou Dongguan, Guangdong, P.R. China
Postal Code: 523525
Tel: +86-769-8345 2480
Fax: +86-769-8334 5656